恒速航行原理的数学证明与分析

提出并证明了船舶经济航行的基本原理———恒速航行原理 .先将实际船舶航行中最经济航行的航速选择这个一般性问题抽象成纯数学问题 :在规定的时间内从A地航行到B地 ,如何选择航速以使推进系统总耗功最省 ;然后在数学上证明恒速航行原理 ,即恒速航行是船舶经济航行唯一的选择 ;最后 ,将该原理推广到其它交通手段 ,如车辆行驶和飞机飞行     

履带车辆动力性仿真研究

为仿真履带车辆动力性,建立了动力性评价指标的仿真模型,并以某型车为实例,应用Matlab语言编程计算得出理论值,通过与试验值比较验证了模型的有效性和准确性。     

直升机单机等距螺旋应召搜潜效能模型与仿真

等距螺旋法是直升机应召反潜中常用的搜潜样式。潜艇位置误差及航速误差对螺旋搜潜概率及搜潜战术运用具有显著影响。依据研究问题的逻辑关系,分别建立了潜艇速度散布模型和等距螺旋搜潜效能模型,运用蒙特卡罗法对直升机应召螺旋搜潜效能进行分析评估。实例验证了模型的可信度,提出了存在潜艇速度误差条件下,延迟时间和预估航速的改变对于搜潜效能的影响。     

Effect of tool rotational speed on the particle distribution in friction stir welding of AA6092/17.5 SiCp-T6 composite plates and its consequences on the mechanical property of the joint

This study investigates the effect of tool rotational speed (TRS) on particle distribution in nugget zone (NZ) through quantitative approach and its consequences on the mechanical property of friction stir welded joints of AA6092/17.5 SiC_p-T6 composite. 6 mm thick plates are welded at a constant tool tilt angle of 2° and tool traverse speed of 1 mm/s by varying the TRS at 1000 rpm, 1500 rpm and 2000 rpm with a taper pin profiled tool. Microstructure analysis shows large quantity of uniformly shaped smaller size SiC particle with lower average particle area which are homogeneously distributed in the NZ. The fragmentation of bigger size particles has been observed because of abrading action of the hard tool and resulting shearing effect and severe stress generation due to the rotation of tool. The particles occupy maximum area in the matrix compared to that of the base material (BM) due to the redistribution of broken particles as an effect of TRS. The migration of particles towards the TMAZ-NZ transition zone has been also encountered at higher TRS (2000 rpm). The microhardness analysis depicts variation in average hardness from top to bottom of the NZ, minimum for 1500 rpm and maximum for 2000 rpm. The impact strength at 1000 rpm and 1500 rpm remains close to that of BM (21.6 J) while 2000 rpm shows the accountable reduction. The maximum joint efficiency has been achieved at 1500 rpm (84%) and minimum at 1000 rpm (68%) under tensile loading. Fractographic analysis shows mixed mode of failure for BM, 1000 rpm and 1500 rpm, whereas 2000 rpm shows the brittle mode of failure.     

EU armed forces and social media: convergence or divergence?

This article explores how armed forces in EU member states work with and view social media in national and international settings, and what the patterns of convergence/divergence are on these issues. To that end, a questionnaire targeted at EU armed forces was constructed. An index of qualitative variation was calculated to explore the relative convergence among respondents (n = 25) on issues of risks and opportunities with using social media nationally and internationally. Consistent with previous research on European armed forces, we found higher levels of divergence than convergence. Contrary to our expectations that similar challenges, joint international standards, and membership in international organizations would foster convergence with regard to social media use in areas of deployment, we found that convergence appeared foremost pertaining to the domestic level. Policy divergence was strongest in areas of deployment.     

新条件下Fourier级数L~p可积性的研究

小样本多元数据分析和数据压缩、编码等是装备维修与故障分析中的常用技术,这些技术的理论研究常常归结到用函数的Fourier系数刻画可积函数类问题。研究了正弦级数和余弦级数属于Lp函数类的条件,建立了在NBVS假设条件下的判别准则,推广了已有结果。